YGFY SERIES Fully Computerized Vacuum Transfer Flexo Printing Slotting Die-Cutting Machine

Business contract can be saved in computer system; can be quickly changed, and easy for operation(on separate PC platform).
Additional computerized remote maintenance; which can quickly resolve equipment fault, improve repairing efficiency, and lower maintenance cost.
All driving rolls are made of high quality steel, galvanized with hard chromium, with surface grinded.
All driving gears are made of grinded high quality steel, Rockwell hardness >60 after heat treatment.
Units of the machine can split either in auto or individual; bell rings during movement, ensure safety for operators.

Continuous feeding or skip feeding(with counter).
Three axis lead edge feeder increases air flow volume; more stable and accurate.
Vacuum air and pressure is controlled by inverter, to fit various paper size.
Feeding stroke is adjustable, reduce tension on paper feeding rubber roll.
De-dusting unit, brush and blower can remove debris from paper.
Roll gap adjustment is achieved by computer and numeric control.
Left and right paper guard are controlled by computer and numeric control.
Rear paper rack is electric controlled, setting speed is fast.
Interlock for main motor protection(machine is not lock in, motor cannot start running).

Continuous feeding or skip feeding(with counter).
Three axis lead edge feeder increases air flow volume; more stable and accurate.
Vacuum air and pressure is controlled by inverter, to fit various paper size.
Feeding stroke is adjustable, reduce tension on paper feeding rubber roll.
De-dusting unit, brush and blower can remove debris from paper.
Roll gap adjustment is achieved by computer and numeric control.
Left and right paper guard are controlled by computer and numeric control.
Rear paper rack is electric controlled, setting speed is fast.
Interlock for main motor protection(machine is not lock in, motor cannot start running).
Locking device at both left and right for reeled plate mounting, provide an accurate plate alignment.
Pneumatic clutch is provided for anilox roll, while unit is engaged in printing, the speed will be synchronized with main machine; while not engaged in printing, anilox roll can stop running, this may reduce wearing of rubber roll and anilox roll, and no need to be synchronized with main motor during cleaning.
Printing registration, is adjusted by computer and numeric control.
Traverse registration, is adjusted by computer and numeric control, at range of ±10mm.
Gap between impress rolls, anilox rolls are adjustable through computer and numeric control.
Auto switch cleaning device, more water ink is recycled.
Auto system recovery after cleaning printing plate.
Single doc. blade inking system.

8 shaft slotting which contains 2 pre-creasing shaft, 1 creasing shaft and 1 knife shaft. It gives better shaping of the box for later folding and gluing.
Traverse moving mechanic of slotting knife, with screw and linear guide sleeve cooperated, movement shall be more agile and accurate.
Upper and lower knife seat is connected with coupler, knives are aligned, which ensures a long service life.
Slotting registration and carton height, is adjusted by computer and numeric control.
Traverse movement of pre-creasing wheel, creaser wheel, slotting knife base, is adjusted by computer and numeric control.
Gap between slotting knife shafts, is adjusted by computer.
Self-lock is applied for pre-creasing, creasing gap adjustment.
Anti-crash device is equipped in slotting knife equipment for carton height adjustment, which protects the machine.
Elastic edge trimming mechanic, is capable of cutting three-layer, five-layer carton without adjustment, easy for operation.

Driven by the servo motor,it further ensures the low vibration on the printer units to achieve higher printing accuracy.
Anvil rubber roller speed compensation adopted independent motor for driving to control the rubber roller speed,the compensation scope is±3.5mm,make the same speed between Anvil rubber roller and ● Die cutting roller.
40mm side to side oscillation of anvil drum device,prolngs the mats service life.
The transversal movement is digitally adjusted by motor and PLC,rang about+10mm.
Die-Cutting register is controlled by PLC with servo motor driving.
Ail rubber trimmer to kee surface of the anvil covers flat and smooth

Model	920	924	1220	1224	1624	1628
Max design speed	260	250	250	230	180	160
Max coating production speed	120	120	120	120	120	120
Max feeding size	900×2100	900×2500	1200×2100	1200×2500	1600×2500	1600×2900
Min. feeding size	320×600	320×600	360×600	380×600	450×600	450×600
Max printing area	900×1950	900×2350	1200×1950	1200×2350	1600×2350	1600×2750
Skip feeding	1200×2000	1200×2400	1500×2000	1500×2400	1900×2400	1900×2800